Technical Parameters
No. | Description | Stencil Inspection Machine C700 |
1 | Inspection Item | Opening Area,Location,Offset,Size,Foreign materials |
Burr,Blocking Hole,Porous and Tension Check | ||
2 | Inspection Time | 50s (130mm*100mm,Standard, Data:25122 hole) |
3 | Precision of The Opening Area Measurement | Gage R&R ＜5.0% (Actual Measurement Below Gage R&R≤1~2%) |
4 | Opening Section Position Measurement Accuracy | ±10μm (Customizable) |
5 | Transmission Mechanism Accuracy | Repetitive ±5μm Sevo System ( Resolution:0.5μm ) |
6 | Tension Detection | ±0.1N/Cm,TensionRange0~50N/Cm |
7 | CCD Camera | 12 MillionPixel (Standard) 20 Million Pixel (Option) |
8 | Camera Lens | Double Telecentric Lens |
9 | Lighting | Special White LED Light Source (Long Strip Light Source) |
10 | Resolution Ratio | Default:7.2μm |
11 | FOV | 24mm*18mm |
12 | Driving System | Linear Motion |
13 | Platform | Marble platform |
14 | Scanning Scope | 550mm*550mm |
15 | Stencil Mesh Size | 250*250mm~736*736mm |
16 | SPC | Opening Position,Area,Size,SPC Data Analysis,Summary Report |
17 | Gerber File Input | RS-274、RS-274X |
18 | Off-Line Programming | I t Can Be Viewed Via Off-Line Programming |
19 | Input Power Requirement | 220V,1Φ,50/60Hz,Power Consumption:2000W |
20 | Machine Dimension | 1327*1266*1500(Length*Width*Height) Excluding Tri-color Lights |
21 | Input Air Supply | 0.4~0.6Mpa |
22 | Machine Weight | 1000Kg |
23 | Data Traceability | Auto Save All Detection Data |
24 | Comparison Function | Previous and New Stencil Data Comparison Function |
25 | Report generation | Automatically Generate Detection Reports |
26 | MES | Yes |
27 | 3D Thickness Inspection | Option |
28 | Squeegee Inspection | Option |